Submersible Load Cell
(For Triaxial Chambers)
- Can be submerged fully to an external pressure of up to 70 bar
- Robust Construction
- Pressure compensated design
- Easy to install
- High Side Load Tolerance
- Stainless steel construction
- Offshore oil and gas production
- Transport and salvage
- Commercial fisheries
- Marine applications
- Triaxial Chambers
WSI manufacture Submersible load cells under BEST brand and model no BSML. These load cell can be used where the load is to be measured while the load cell is submerged in oil or water or Triaxial chambers.
These load cells are designed to measure compressive loads in triaxial chambers. A limited range of tension load can also be measured.
An internal pressure compensation system is the feature of the design which eliminates zero offset changes when the load cell is subjected to external pressure changes. Being insensitive to cell confining pressure, the load cell can be used in triaxial chambers, measuring the load from within the chamber also eliminates the effects of piston friction.
The use of specially elected heat treated stainless steel and precision strain gauges ensure optimum performance and excellent long term stability.
Stock Capacities Available (kN): 1,3,5,10,25,50,100
Rated output: 2mV/V
Non Linearity: <0.05% +/- of full scale
Hysteresis: <0.1 +/- of full scale
Temperature range Operating: -20 to +80 degree celsius
Temperature range compensated: 0 to 50 degree celsius
Temperature effect on output: <0.01 +/- of FSO/degree Celsius
Temperature effect on Zero: <0.02 +/- of FSO/degree Celsius
Safe Overload: 150% of rated capacity
Construction material: Stainless Steel
Environment Protection: Fully submersible to 70 bar
Cable: 3 Metre 4 core shielded cable